Designed for installations requiring a fire, smoke and acoustic door set, this versatile exterior fire door set has a 30 minute fire resistance rating (FRR). It is manufactured with a solid laminated veneer lumber (LVL) core and marine grade plywood facing (P-CORE). Unless you request a special finish, this door will be supplied sealer coated on all six sides, ready for priming and painting. This is a hung door, which means it is supplied as a complete fire door set - door leaf, door jamb, seals and, where requested, appropriate hardware.
Fire doors
Our most popular 30 minute FRR hinged exterior fire, smoke and acoustic door set, the E-30-H is available in singles. The door leaf is a solid laminated veneer lumber (LVL) core faced with marine grade plywood (P-CORE). The standard door set is supplied sealer coated on all six sides, ready for painting.
- Leaf sizes up to 2420 high x 1220 wide per leaf
- Thickness 44 mm
- Weight 20 kg /m2
- Acoustic singles and doubles up to STC 33
- Paint quality factory sealed
- 1 mm stainless steel kickplate to 1000 mm – inside only
- 7 mm hardwood clashing to hinge edge
- 7 mm hardwood clashing to leading edge (Flush pairs & Singles)
32mm hardwood timber (types 1, 2 & 3), width 81 – 350 mm, planted stops (30 x 16), full width available at extra cost (other timber options available by request)
or 1.6 mm galv steel, paint quality or powdercoat options available
-
Timber - Full width planted stop
Available for all timber profiles (non-standard surcharge applies)
Not available for exterior door sets
The minimum requirement is for a fire door to be self-closing and self-latching. Hardware must be selected from NZ Fire Doors’ Approved Hardware list from the column ‘30 min’. Fitting any hardware that inhibits self-closing or self-latching is not approved by NZS 4520
IMPORTANT: Fitting untested or inappropriate hardware may affect the performance of the door and will void the warranty.