firedoors 60

I-60-H Interior 60 minute FRR hinged door-set, single or pair

This versatile interior fire door set has a 60 minute fire resistance rating (FRR). It is manufactured with a solid composite timber core and an integral MDF face layer (S-CORE). Unless you request a special finish, this door will be supplied sealer coated on both faces, ready for priming and painting. For applications where the door has to match other architectural features, we can apply a specified veneer or overlay (laminate, vinyl or steel) to the faces. Inlay panels or planted detail can also be affixed on request, to suit heritage buildings.  This is a hung door, which means it is supplied as a complete fire door set - door leaf, door jamb, seals. We can also supply appropriate hardware.

Data Sheet

I-60-H: Interior 60 minute FRR hinged door-set, single or pair

Our most popular 60 minute FRR interior fire, smoke and acoustic door set, the I-60-H is available in singles or pairs. The door leaf is a solid composite timber core faced with an integral MDF layer (S-CORE). The standard door set is supplied sealer coated on both faces or you can specify a facing and/or kickplate.

  • Single leaf sizes up to 2400 high x 1000 wide per leaf
  • Pair leaf sizes up to 2200 high x 380 min to 938 max per leaf
  • Thickness 55 mm
  • Weight 35.2 kg /m2
  • Acoustic singles and doubles up to STC 34 

  • Paint quality factory sealed
  • Timber veneer full height
  • High pressure laminate partial or full height
  • Sheet vinyl to 1000 mm
  • 7 mm hardwood clashing to hinge edge 
  • 7 mm hardwood clashing to leading edge (Singles)
  • 18 mm hardwood clashing to lead edge (Rebated pairs)

Timber (the standard option)

  • Rebated

    Timber Rebated

  • Flush

    60 minute rated fire door timber flush

30mm (Singles) 35mm (Pairs) hardwood timber (types 1, 2 & 3), width 92 – 600 mm, planted stops (30 x 16), full width available at extra cost
 (steel jambs are temporarily unavailable) or 1.6 mm electrogalv steel (types 5, 6, 7 & Speedwall), paint quality or powdercoat options available

  • T1 – Timber

    T1 Timber Flat Jamb

    Timber flat for architrave

  • T2 – Timber

    fire door jamb

    Grooved for wall lining to suit (12 mm reveals)

  • T3 – Timber

    timber rebated fire door jamb

    Rebated for wall lining to suit (non-standard surcharge may apply)

Timber - Full width planted stop

Available for all timber profiles (non-standard surcharge applies)

The maximum glazed areas are detailed below, subject to minimum clearances.

Glass Type

Maximum
Height(mm)

Maximum
Width(mm)

Maximum pane area

(m²)

FRR

Pyranova 60 S3.0 (Pyro 23mm)

1550

635

0.657

-/60/60

 

Pyranova 30 S3.0 (Pyro 15mm)*

1275

435

0.369

-/60/30

 

 

 

 

 

 

 

 

Please note:

    • Up to two vision panels allowed in a single leaf (only when using Pyro23 glass). Please refer to the details below for limitations around two vision panels.
    • Circular vision panels are not available.
    • The height and width of the vision panel/s must still fall within the maximum glazed area.
    • Vision panel only approved for 55mm Triboard.
    • The distance between the vision panel cutout and any item of hardware shall be at least 60 mm.
    • *Minimum top edge distance of 250 mm when using Pyro15

 

Call our Sales Team for more information on (09) 579-8895

  • Placement dimensions

    diagram of a fire door

    PDF

  • Double VP

    Doubled Centred VP

    PDF

Square (standard)

  • No additional charge
  • 60 minute fire door square bead diagram

The I-60-H is available with a sidelight, made to order. If you require a sidelight, please contact a member of our sales team to discuss and confirm specific design and pricing details.

  • Perimeter timber 45 mm.
  • Only available in a single-panel configuration .
  • Maximum sidelight size: 2250H x 356W.
  • Only available in Pyronova 60 S.30(Pyro23) glass.  
  • Please contact our team for more details.
  • Door Sitelight

The minimum requirement is for a fire door to be self-closing and self-latching. Hardware must be selected from NZ Fire Doors’ Approved Hardware list from the column ‘60 min’. Fitting any hardware that inhibits self-closing or self-latching is not approved by NZS 4520

IMPORTANT: Fitting untested or inappropriate hardware may affect the performance of the door and will therefore void the warranty.

Download Building Product Information

 

Download the Technical Compliance Statement

Get a Quote Installation guide Painting & care Order detail sheet