firedoors 90

E-90-H

Exterior 90 to 240 minute FRR hinged door, single or pair

Designed for installations requiring a fire, smoke and acoustic door set, this versatile exterior fire door set is available with a 90, 120, 180 or 240 minute fire resistance rating (FRR).  Please note that the maximum insulation rating is 30 minutes for any of these doors.  It is manufactured with a mineral core (E-CORE) and 1mm steel on all facings. Unless you request a special finish, this door will be supplied in plain galvanised or zincalume finish. This is a hung door, which means it is supplied as a complete fire door set - door leaf, door jamb, seals and appropriate hardware.

Data Sheet

E-90-H: Exterior 90 to 240 minute FRR hinged door, single or pair

Our most popular 90, 120, 180 or 240 minute FRR hinged exterior fire, smoke and acoustic door set, the E-90-H is available in singles or pairs. The door leaf is a mineral core faced on all sides and edges with 1mm steel (E-CORE). The standard door set is supplied in plain galvanised or zincalume finish. Leaf sizes up to 2440 high x 1200 wide per leaf

  • Thickness 45 - 55 mm
  • Weight 28.2 kg/m2
  • Acoustic singles and doubles up to STC 35. Call us on 09 579-8895 for bespoke engineered solutions to higher STC ratings.

  • Paint quality galvanised or zincalume steel
  • Powder coat finished (surcharge applies)

Aluminium

  • C/C

    Ecore CC 45

  • C/J

    Ecore CJ 45

  • J/J

    Ecore JJ 45

  • OldEcoreCC

  • OldEcoreJC

  • OldEcoreJJ

1.6 mm electrogalv steel (types 5, 6, 7 & Speedwall), paint quality or powdercoat options available

  • T5 – Steel

    T5 Steel jamb

    DWG PDF

    Steel width 111 – 350 mm

  • T6 - Steel

    T6 steel jamb

    PDF

    Steel width 146 - 208 mm

  • T7 – two piece split steel

    T7 steel jamb

    PDF

    Ideal for retrofit situations. No additional charge. Min 104 mm if masonary wall, Min 112 mm if stud wall - no max

  • Steel Speedwall

    Steel Speedwall jamb

    PDF

    Requires Speedwall C track (80mm end cap), (Max -/120/30 sm)

Not available for 90+ minute FRR fire door unitsets

The minimum requirement is for a fire door to be self-closing and self-latching. Hardware must be selected from NZ Fire Doors’ Approved Hardware list from the column ‘90, 120 min’. Fitting any hardware that inhibits self-closing or self-latching is not approved by NZS 4520

IMPORTANT: Fitting untested or inappropriate hardware may affect the performance of the door and will void the warranty.

Download the Technical Compliance Statement

Get a Quote Installation guide Painting & care Order detail sheet