Designed for installations requiring a fire and smoke door set that opens in either direction, this versatile interior double acting fire door set has a 90 to 120 minute fire resistance rating (FRR). Please note that the maximum insulation rating is 30 minutes for any of these doors. It is manufactured with a mineral core (E-CORE) and an MDF face layer (). Unless you request a special finish, this door will be supplied sealer coated on both faces, ready for priming and painting. For applications where the door has to match other architectural features, we can apply a specified veneer or overlay (laminate, vinyl or steel) to the faces. Inlay panels or planted detail can also be affixed on request, to suit heritage buildings. This is a hung door, which means it is supplied as a complete fire door set - door leaf, door jamb, seals and, when requested, appropriate hardware.
Fire doors
Our most popular 90 minute FRR double acting interior fire, smoke and acoustic door set, the I-90-D is available in singles or pairs. The door leaf is a mineral core (E-CORE) faced with an MDF layer. The standard door set is supplied sealer coated on both faces or you can specify a facing and/or kickplate.
- Leaf sizes up to 2400 high x 1200 wide per leaf
- Thickness 49 mm
- Weight 24.2 kg /m2
- Acoustic values are difficult to achieve with double acting doors as it is not possible to fit drop sill seals to the door bottoms
- Paint quality factory sealed
- Timber veneer
- High pressure laminate full height
- Sheet vinyl to 1000 mm
- 1 mm galvanised steel facings
- 1 mm stainless steel kickplate to 1000 mm – both sides
- Call us on 09 579-8855 for other options
Important note: The construction of this door does not lend itself to high gloss finishes, unless some level of visible undulation is acceptable in the application
- Aluminium C Capping (standard)
Robax 6 mm fire glass is used for all options. In addition to the standard options shown below, we offer bespoke designs that are available on request from our sales team. The maximum panel size is 0.11 m2 (max 750 h x max 150 w), subject to minimum clearances. Robax is non-insulated glass so the choice of vision panel may affect the insulation rating.
1.6 mm electrogalv steel (type 8), paint quality or powdercoat options available
These are not available for 90+ minute FRR fire door sets.
The minimum requirement is for a fire door to be self-closing and self-latching. Hardware must be selected from NZ Fire Doors’ Approved Hardware list from the column ‘90, 120 min’. Fitting any hardware that inhibits self-closing or self-latching is not approved by NZS 4520
IMPORTANT: Fitting untested or inappropriate hardware may affect the performance of the door and will void the warranty.