Designed for installations requiring a fire, smoke and acoustic door set, this versatile exterior fire door set has a 60 minute fire resistance rating (FRR). It is manufactured with a solid laminated veneer lumber (LVL) core and marine grade plywood facing (P-CORE). Unless you request a special finish, this door will be supplied sealer coated on all six sides, ready for painting. This is a hung door, which means it is supplied as a complete fire door set - door leaf, door jamb, seals and appropriate hardware.
Our most popular 60 minute FRR hinged exterior fire, smoke and acoustic door set, the E-60-H is available in singles or pairs. The door leaf is a solid laminated veneer lumber (LVL) core faced with marine grade plywood (P-CORE). The standard door set is supplied sealer coated on all six sides ready for priming and painting.
- Leaf sizes up to 2440 high x 1220 wide per leaf
- Thickness 54 mm
- Weight 24 kg /m2
- Acoustic singles and doubles up to STC 34
- Paint quality factory sealed
- 1 mm stainless steel kickplate to 1000 mm – inside only
Pyro fire glass is used for all options. In addition to the standard options shown below, we offer bespoke designs that are available on request from our sales team. In exterior applications Pyro 15 is replaced with Pyro 18 and Pyro 23 is replaced with Pyro 27 as an extra layer of UV shielding is added to one side (size limitations remain the same). For this reason the exterior face of the door needs to be noted when detailing.
Section 4.16.1 of NZ Building Code Acceptable Solutions defines the maximum integrity ratings for openings in fire and smoke separations as -/60/30 across all seven Purpose Groups. For large area vision panels in doors, and for overlights and sidelights, specifying the glass at -/60/30 will reduce the weight and cost of your door or door and sidelight unit.
Call our Sales Team for more information on (09) 579-8895
Gun Slot design (most economical)
30mm hardwood timber (types 1, 2 & 3), width 91 – 350 mm, planted stops (30 x 12), full width available at extra cost
or 1.6 mm galv steel (types 5, 6 & 7 & Korok), paint quality or powdercoat options available
Not available for exterior door sets.
The minimum requirement is for a fire door to be self-closing and self-latching. Hardware must be selected from NZ Fire Doors’ Approved Hardware list from the column ‘60 min’. Fitting any hardware that inhibits self-closing or self-latching is not approved by NZS 4520
IMPORTANT: Fitting untested or inappropriate hardware may affect the performance of the door and will therefore void the warranty.