Fire doors

non rated

I-NF-L

Interior non-fire door leaf, single or pair

This versatile interior door leaf is manufactured with a solid composite timber core and an integral MDF face layer (S-CORE). We also offer a range of glass insert formats and bespoke designs. Unless you request a special finish, this door leaf will be supplied sealer coated on both faces, as well as top and bottom, ready for priming and painting. For applications where the door has to match other architectural features, we can apply a specified veneer or overlay (laminate, vinyl or steel) to the faces. Inlay panels or planted detail can also be affixed on request, to suit heritage buildings. This is a door leaf, which means it is not pre-hung in a jamb. It can be supplied with or without hardware.

Data Sheet

I-NF-L: Interior non-fire door leaf, single or pair

Our most popular non-fire interior door leaf, the I-NF-L is available in singles or pairs. It has a solid composite timber core faced with an integral MDF layer (S-CORE). The standard door leaf is supplied sealer coated on both faces, as well as top and bottom, or you can specify a facing and/or kickplate. There is also an optional range of glazing formats or bespoke designs.

  • Leaf sizes up to 2700 high x 1500 wide per leaf
  • Thickness 38mm
  • Weight 19.76 kg /m2

  • Paint quality factory sealed
  • Timber veneer full height
  • High pressure laminate full height
  • Sheet vinyl to 1000 mm
  • 1 mm galvanised steel facings to 1000 mm with aluminium edge capping full height
  • 1 mm stainless steel kickplate to 1000 mm – both sides
  • Other options on application
  • 7 mm pine clashing to hinge edge
  • 7 mm pine clashing to leading edge of singles & flush pairs
  • 18 mm pine clashing to leading edge of rebated pairs 
  • View all options (PDF)

Timber (the standard option)

  • Flush

    60 minute rated fire door timber flush

  • Rebated

    Timber Rebated

Aluminium (surcharge applies)

  • C/C

    Bullnose CC

  • C/J

    Bullnose CJ

  • J/J

    Bullnose JJ

All options use 10.38 mm laminated glass. In addition to the standard options shown below, we offer bespoke designs that are available on request from our sales team. The maximum panel size is subject to minimum clearances.

  • Placement dimensions

    Doubled Centred VP

    DWG PDF

  • Glass types & size limitations

    VP Size

Square (standard)

  • No additional charge
  • Includes optional aluminium overcap
  • Square Bead with Lip

    60 minute fire door square bead diagram

  • Aluminium Bead

    Aluminium Bead

Bevel (previous standard)

  • Surcharge applies
  • No aluminium cap option
  • Bevel Bead with Lip

    Bevel Bead with Lip

We can supply these units with or without hardware. With pre-cropped doors any hardware supplied will be unfitted . Any standard hardware is suitable for these non-fire door units.

Get a Quote Installation guide Painting & care Order detail sheet